Saturday, 17 October 2009

More reconditioning


In my last post I had mentioned that I had taken the brake drums apart to install new components, as well as this I also have painted the back plates ready to fit the rear brakes bake together again.

Tuesday, 6 October 2009

New parts ordered

Today I ordered the replacement brake drum parts that I need. I ordered new drums and slave cylinders and also new CV joints to replace the existing ones I have that are shot.
I have also spoken to MK and will be ordering a radiator and brackets.
I have also ordered some shim washers and various size P clips for attaching the final parts of the brake pipes. Just need to wait for all of it to come now...

Sunday, 4 October 2009


This picture shows the contents of the drum brakes post me taking them out of the drum, these are what I need to replace with new parts. I will also need to refurbish the clips and fixings and clean these up.

Brake drums inspection


I decided to take the brake drums apart to see what condition the shoes and the slave cylinder were in so I carefully took it apart and decided that I would be better off changing the shoes (already bought some replacements) and also the drum was in a rough state covered in rust so for the sake of £30 I could get some new ones. I also decided that the slave cylinder needed changing and so took this out. I will pop down euro car parts this week to order up some new ones so i can fully refurbish the drum brakes. The picture shows the back plate with the contents of the drum brakes taken out.

Another pic of the steering rack


This picture shows the steering rack from the side installed on the car.

Its been a while - steering rack added


Its been a while since i worked on the car the summer has gone, and due to holidays, illness and enjoying ourselves most weekends I haven't had the time to work on the car. I decided that this sat I would dedicate a day to working on the car and managed to do a number of things. Firstly I cleaned up the steering rack and installed this. Then I did some pre planning and worked out a shopping list for the coming phases of the build. I then thought I would install the diff and I undid the plug and drained the diff of oil and the rubbish that has been in it and at this point I noticed it was leaking quite a lot of oil to the underneath ofthe diff. After some thought I decided that I either needed a diff that wasn't going to leak or I need to recondition the diff I have. I am currently researching what to do on this as there are diff recondition packs you can buy and I think this would be the best option.

Thursday, 16 July 2009

More brake pipes


A further image of the brake pipe install.