I took the diff to Phil Jones to get get it rebuilt and reconditioned, he has done a great job and now it is ready to be bolted onto the car. I hope to get this completed on Sunday.
Saturday, 17 October 2009
Diff now finished
I took the diff to Phil Jones to get get it rebuilt and reconditioned, he has done a great job and now it is ready to be bolted onto the car. I hope to get this completed on Sunday.
More reconditioning
Tuesday, 6 October 2009
New parts ordered
Today I ordered the replacement brake drum parts that I need. I ordered new drums and slave cylinders and also new CV joints to replace the existing ones I have that are shot.
I have also spoken to MK and will be ordering a radiator and brackets.
I have also ordered some shim washers and various size P clips for attaching the final parts of the brake pipes. Just need to wait for all of it to come now...
I have also spoken to MK and will be ordering a radiator and brackets.
I have also ordered some shim washers and various size P clips for attaching the final parts of the brake pipes. Just need to wait for all of it to come now...
Sunday, 4 October 2009
Brake drums inspection
I decided to take the brake drums apart to see what condition the shoes and the slave cylinder were in so I carefully took it apart and decided that I would be better off changing the shoes (already bought some replacements) and also the drum was in a rough state covered in rust so for the sake of £30 I could get some new ones. I also decided that the slave cylinder needed changing and so took this out. I will pop down euro car parts this week to order up some new ones so i can fully refurbish the drum brakes. The picture shows the back plate with the contents of the drum brakes taken out.
Its been a while - steering rack added
Its been a while since i worked on the car the summer has gone, and due to holidays, illness and enjoying ourselves most weekends I haven't had the time to work on the car. I decided that this sat I would dedicate a day to working on the car and managed to do a number of things. Firstly I cleaned up the steering rack and installed this. Then I did some pre planning and worked out a shopping list for the coming phases of the build. I then thought I would install the diff and I undid the plug and drained the diff of oil and the rubbish that has been in it and at this point I noticed it was leaking quite a lot of oil to the underneath ofthe diff. After some thought I decided that I either needed a diff that wasn't going to leak or I need to recondition the diff I have. I am currently researching what to do on this as there are diff recondition packs you can buy and I think this would be the best option.
Subscribe to:
Posts (Atom)
