A further image of the brake pipe install.
Thursday, 16 July 2009
Brake pipe install
Mark came over tonight and after having a look at the new loom from premier wiring that came today we set about fixing the brake pipes to the master cylinder and then attaching them to the chassis via the brake pipe clips. 6mm holes were drilled for this and then the clip inserted into the hole with the pipe then fixing into this. We then had to use the brake pipe bender (what a gadget) to bend the pipes in the relevant directions to make a neat and tidy job. I found I was missing some pipes on the rear so will need to contact MK to get these ordered. I still have some further work to do to P clip some of the pipes, which I will do this weekend.
Saturday, 11 July 2009
New brake drum shoes purchased
Brake drums cleaned up
A bit of cleaning and some donor part refurb
Sunday, 5 July 2009
Floor on and riveted
This weekend I finished the floor but it didn't go as smoothly as I had wanted it to.
I started by putting the sealant onto the chassis and then lowered the floor onto it, lined it up and then put the rivets into the holes ready to rivet it. I got my lazy tongue riveter out to use and on the first rivet it broke. It just would not spit out the rivet redundant part. I then had to make a decision either to carry on and use a hand riveter instead to rivet the whole floor before the sealant went off or go and get another lazy tongue riveter from somewhere. I thought I would use the hand riveter but after having done about 20 rivets (my my hands shaking from the effort required),on a boiling hot day I gave up and quickly visited machine mart in Bristol and bought another lazy tongue riveter. I managed to then use this to complete the job. The picture shows all the rivets inserted at gaps of around 5 cm's.
Monday, 22 June 2009
Floor continued
I was joined in the garage today by Mark a friend who has built his own MK Indy blade recently and I really appreciated his advice and guidance. We both worked on getting the floor attached by continuing the prep work needed to do this.
Next we placed the aluminium floor on top of the chassis and clamped it in place. We then drilled 3mm holes in the floor into the chassis (every. Once we had done this we then increased the size of the holes to 5mm with a larger drill bit. We then went round each hole and got rid of any rough edges from the holes.
We also drilled 3mm holes in the transmission tunnel and various other areas which would be hard to get to once the floor was in place. This was an excellent piece of advice from Mark, thanks Mark.
Now its time to attach the rivets and get it attached.
Subscribe to:
Posts (Atom)
